Request for Quote
You have selected to request a quote for the following product(s) or service(s):
- FMC-CL, Cameralink frame-grabber FMC by Sundance Digital Signal Processing, Inc.
Please complete the form below to request a quote. Fields marked with * are required, but providing all of the information in full will result in a more complete quote for you.
FMC-CL, Cameralink frame-grabber FMC:
FMC/CL is a Camera Link FMC (FPGA Mezzanine Module) that interfaces to quad BASE, MEDIUM, and dual FULL and Extended FULL Camera Link compatible cameras.
The FMC/CL has variety of I/O capabilities – 2 x SATA connectors and 4 CL connectors that can also be used as a general purpose I/O.
Table below shows the mode and the support provided by the hardware based on FPGA card used.
Interface LPC Carrier HPC Carrier Single Base CL v v Dual Base CL v Quad Base CL v Single Medium CL v v Dual Medium CL v Single Full / Extended Full CL v v Dual Full / Extended Full CL v FMC-CL is supported by Sundance DSP PXIe700, and K800 PCIe FPGA boards using Xilinx Kintex series. The IP core for capturing the frames from the camera(s) is included. An extension PC bracket and flex cables allows the use of two cameras in Full/Extended modes.
PXIe700 and K800 are 100% user programmable with an open FPGA that enables users to implement their proprietary image and signal pre-processing algorithms. Custom functions can use XC7K325T-1FFG900C or XC7K410T-1FFG900C (optional industrial grade) FPGAs. This module can be expanded/pipelined using additional FPGAs if necessary. PXIe700 has also 2 banks of DDR3 memory, 1GB each, 32-bit wide and 128 MB FLASH. PXie700 has 10Gb Ethernet or Fiber Optics communication links.
•Dual Base, Quad Base, Medium, Full and Extended Full CL configuration •PoCL (Power over Camera Link) support •Up to 85 MHz data rate •ESD protection for all Camera Link signals •Optional Dual SATA for direct disk interface •LPC (low pin count) and HPC (high pin count) •Commercial and Industrial grades